Overview of magnetic tile clips.

The magnetic tile clip is the clip that fixes the magnetic tile, also known as the magnetic tile fixing clip. The magnetic tile clamp is used to fix the magnetic tile in the housing. Its characteristics require strong elasticity and hardness of heat treatment. Magnetic clamps are now installed using automatic riveting tooling.

Material

The choice of magnetic tile clip material can be determined according to a certain standard of the customer. For example, we need to ensure that the product has a good rebound, then we must use 65 fierce; If we want the salt spray to pass 96 hours or more, we'll use stainless steel. In general, the proportion of manganese steel is larger than that of stainless steel.

Riveting

1.The traditional riveting of magnetic tile clamp is riveted through the center hole of the magnetic tile clamp through the rivets on the side wall of the casing, and the magnetic tile is installed and fixed by glue. This method has the advantage of being particularly strong. The disadvantages are low efficiency and unattractive appearance.

2.magnetic tile clamp Another riveting method is U-shaped wire. Using the wire's characteristic resilience, it's stuck between two magnetic tiles. This method has improved the relative efficiency, but the probability of falling off is much higher, which makes the life of the motor is not guaranteed.

3.Magnetic tile clamp The most mature riveting method is to use magnetic tile clamp. With the special shape of the magnetic tile clamp, the resilience of manganese steel and the automation of riveting improve motor performance in all aspects. However, due to the diversity of the magnetic tile, the matching of the magnetic tile clip needs to be tested by professionals for many times, and the sample can be completed by considering the tightness, fit, arc of the magnetic tile clip after installation, and the resilience rate.

After the product has passed the sample, the magnetic tile clamp riveting tool can be designed. The use of tooling riveting depending on the proficiency of the employee, the number of riveting is 2000 to 15000 shells. This is about two magnetic tiles.